e Colors P10 V06 CM2 Read Stock Rom Display fix logo fix 100% tested Firmware file without password Download Free. - AG_Firmware File

AG_Firmware File

In this AG Firmware File side, you can get any types of Companies’ firmware files which files are 100% tested files. You can be flashed any type of mobiles by helping of tested firmware files without any risks. Definitely, you will be satisfied after using this all tested files of my side because AG firmware files have been tested in practical. As a result related to software problem of any types mobile has resolved successfully.

Sunday, April 12, 2020

Colors P10 V06 CM2 Read Stock Rom Display fix logo fix 100% tested Firmware file without password Download Free.

The Firmware file is an operating system. Which works to direct hardware. Which we know as software. Mobile does not exist without software. In the same area we technicians consider software important. We use it daily in the mobile sector whether it is for flashing or unlocking, but we use software. You can use the firmware file of all the companies including Samsung in this city to upgrade, downgrade and flash your mobile. Now you can get free of cost file at no cost. Now you don't have to go to any other side, we will upload all the company files to you daily on AG_Firmware File website.

Colors P10 V06 CM2 Read Stock Rom Firmware Flash File

Details of mobile Phone Colors P10 V06 Cm2 Dongle Read Official Firmware Stock Rom for Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File without password Download Free.

@ Brand: Colors
@ Mobile Model: P10
@ Android Version:  4.4.2
@ Processor/chipset: MT6571
@ RAM: 256 MB
@ FW Size: 221 MB  
@ Firmware Size: 178 MB     
@ Build Number: Colors P10 V06
@ Password: AG_Firmware File_ Asmit Shrestha

After using this firmware file, any kind of problems will be resolved with 100% tested Colors P10 V06 Cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File without password Download Free.

@ Pin removes.
@ Password removes.
@ Pattern Remove
@ Hang on logo problem solves.
@ Boot logo problem solve.
@ Dead fix/LCD fix.
@ File missing problem solve.
@ Ram performs slowly.
@ Phone works slow.
@ Unwanted monkey/sexy virus remove also.
@ App has been stopped unfortunately.
@ When the Black/White LCD has showed on the phone.
@ Restart your phone automatically.
@ Install the application automatically.
   Download Here 

Process of mobile flashing         MTK

@ Make sure your device has 40 percent changed to perform flashing.
@ At first, you have to be switch off the mobile.
@ Open the SP flash tool and other supported box or dongle.
@ Select the scatter Firmware file.
@ After selection, flashing process will start automatically.
@ The Flashing process starting will be taking some time, at the same time mobile has to connect to USB cable.
@ After flashing process is completed successfully.

Colors P10 V06 Cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File without password Download Free, If you have any doubt about of this file, You can see/check the read firmware file detail.

Colors P10 V06 CM2 Read Stock Rom Firmware Flash File

Operation: Read Flash [v1.58]
1. Power Off Phone, Remove battery, Insert back
2. Insert USB cable. In some cases require hold Boot Key
Wait for phone...
Phone found! [3]
Sync...
Initial Boot Ok!
BB_CPU_PID: 6580
BB_CPU_NME: MediaTek_MT6580_S00
BB_CPU_EXT: 0xCA00, 0x8A00, 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal_0x00000000
BromVer_0x00FF
BLVersion_0x0001
Pre Loader: Active [Boot with PL]
Boot LDRSS: NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA.
Running DA ver.4.2 on BBID: 0x94
NAND Flash: NOT INSTALLED
EMMC Flash: 150100463732324D42002A5E90BE83B3
Initialize Memory.
DRAM already initialized by Preloader
DA gent sent, init HW now
EMMC Flash IC initialized
[EMMC]: FLASH_VEN: 0x15, OEM: 0100
[EMMC]: FLASH_INF: [SAMSUNG], BM227
[EMMC]: FLASH_CID: 150100463732324D42002A5E90BE83B3
[EMMC]: FLASH_BRT: 0x00400000, 0x00400000, 0X00080000
[EMMC]: FLASH_LEN: 0x00000001D2000000
[EMMC]: FLASH_UCP: 7456 MIB [EMMC 8 GB]
DEV RID    : 0x99BF2E68376384D0C055735A455E31B6
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GB]
BOOT TYPE: EMMC_FLASH_BOOT
SOC VERIFY: C1
Boot Ok!
Reading Flash Content now
XGPT: Normalize settings Ok!
Brand     : COLORS
Prod Name: Colors_P50_Touch
Prod Model: P50_Touch
Device: Colors Mobile
Android: 6.0
MTKXCPU   : MT6580
MTKXPRJ   : alps-mp-m0.mp1-V2.34_rgk6580.we.m
[Read Ok]: preloader_d5171_teletalk.bin
[Read Ok]: lk.bin
[Read Ok]: boot.img
[Read Ok]: recovery.img
[Read Ok]: logo.bin
[Read Ok]: secro.img
[Read Ok]: system.img
[Read Ok]: cache.img
[Read Ok]: userdata.img
[Scat CFG]: MT6580 / V1.1.2 / d5171_teletalk / EMMC
Android Info saved
MAUI Meta DB saved
HW Con fig Info saved
FW Size_ 2444 MIB
Scatter saved to: C:\Users\Asmit\Desktop\1\New folder (3)\MT6580__COLORS__P50_Touch__Colors_Mobile__6.0__alps-mp-m0.mp1-V2.34_rgk6580.we.m\
All done!
Done!
Elapsed: 00:13:54
Reconnect Power/Cable!

Colors P10 V06 CM2 Read Stock Rom Firmware Flash File

Note

Before downloading this file, check out of your mobile model, version, Processor/chipset properly and then file downloads and flashing. Otherwise, AG_Firmware File side will not be accountability.


Comment box

If you need another file, you can write the model number of this file in the comment box. I will try to provide you with the tested files related to the software problem through the AG_Firmware File website.

No comments:

Post a Comment

Please do not enter any link in the comment box.