e VIPPO Plus VIPPO+ MAX P8 cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File Download Free. - AG_Firmware File

AG_Firmware File

In this AG Firmware File side, you can get any types of Companies’ firmware files which files are 100% tested files. You can be flashed any type of mobiles by helping of tested firmware files without any risks. Definitely, you will be satisfied after using this all tested files of my side because AG firmware files have been tested in practical. As a result related to software problem of any types mobile has resolved successfully.

Thursday, May 14, 2020

VIPPO Plus VIPPO+ MAX P8 cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File Download Free.

The Firmware file is an operating system. Which works to direct hardware. Which we know as software. Mobile does not exist without software. In the same area we technicians consider software important. We use it daily in the mobile sector whether it is for flashing or unlocking, but we use software. You can use the firmware file of all the companies including Samsung in this city to upgrade, downgrade and flash your mobile. Now you can get free of cost file at no cost. Now you don't have to go to any other side, we will upload all the company files to you daily on AG_Firmware File website.



VIPPO MAX P8 VIPPO Plus VIPPO+ MAX P8 cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File Download Free.

Details of Mobile Phone VIPPO MAX P8 CM2 Read official  Stock Rom firmware flash file without password Firmware Download free.

 

@ Brand: Vippo+ (VIPPO Pules)

@ Model: MAX-P8

@ Android Version: 9.1

@ Processor/chipset: MT6572

@ RAM: 512 MB

@ Rom: 4 GB  

@ Custom Build Version: 1569063058     

@ Build Number: Vippo-MAX-P8_C31-V71C50-9.1-20190911.143432

@ Password: AG_Firmware File_ Asmit Shrestha

 

After using this firmware file, any kind of problems will be resolved with 100% tested VIPPO Plus VIPPO+ MAX P8 Cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File Download Free.

 

@ Pin removes.

@ Password removes.

@ Pattern Remove

@ Hang on logo problem solves.

@ Boot logo problem solve.

@ Dead fix/LCD fix.

@ File missing problem solve.

@ Ram performs slowly.

@ Phone works slow.

@ Unwanted monkey/sexy virus remove also.

@ App has been stopped unfortunately.

@ When the Black/White LCD has showed on the phone.

@ Restart your phone automatically.

@ Install the application automatically.

   Download Here 

 

Process of mobile flashing         MTK

@ Make sure your device has 40 percent changed to perform flashing.

@ At first, you have to be switch off the mobile.

@ Open the SP flash tool and other supported box or dongle.

@ Select the scatter Firmware file.

@ After selection, flashing process will start automatically.

@ The Flashing process starting will be taking some time, at the same time mobile has to connect to USB cable.

@ After flashing process is completed successfully.


VIPPO Plus VIPPO+ MAX P8 Cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File without password Download Free, If you have any doubt about of this file, You can see/check the read firmware file detail.


VIPPO MAX P8 VIPPO Plus VIPPO+ MAX P8 cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File Download Free.

Operation: Read Flash [v1.58]

1. Power Off Phone, Remove battery, Insert back

2. Insert USB cable. In some cases require hold Boot Key

Wait for phone...

Phone found! [24]

Sync...

Inital Boot Ok!

BB_CPU_PID: 6572

BB_CPU_NME: [MediaTek] MT6572_S00

BB_CPU_EXT: 0xCA01, 0x8A00, 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal: 0x00000000

BromVer   : 0x00FF

BL Version: 0x0001

PreLoader : Active [ Boot with PL ]

Boot LdrSS: NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA.

Running DA ver.4.2 on BBID: 0x88

NAND Flash: NOT INSTALLED

EMMC Flash: 1501004E355530304D02ADC282308081

Initialize Memory...

DRAM already initialized by Preloader

DA gent sent, init HW now

EMMC Flash IC initialized

[EMMC]: FLASH_VEN: 0x15, OEM: 0100

[EMMC]: FLASH_INF: [SAMSUNG], M00U5

[EMMC]: FLASH_CID: 1501004E355530304D02ADC282308081

[EMMC]: FLASH_BRT: 0x00200000, 0x00200000, 0x00020000

[EMMC]: FLASH_LEN: 0x00000000E9000000

[EMMC]: FLASH_UCP: 3728 MB [EMMC 4 GB]

DEV RID    : 0x99BF2E68FA8291833AECFF3093244363

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MB]

BOOT TYPE: EMMC_FLASH_BOOT

SOC VERIFY: C1

Boot Ok!

Reading Flash Content now...

Brand     : VIPPO

Prod Name: MAX P8

Prod Model: MAX P8

Device    : MAXP8

Android Ver: 4.4.2

MTK CPU   : MT6572

MTK PRJ   : ALPS.KK1.MP7.V1

[Read Ok]: preloader_yuanda72_cwet_kk.bin

[Read Ok]: MBR

[Read Ok]: EBR1

[Read Ok]: lk.bin

[Read Ok]: boot.img

[Read Ok]: recovery.img

[Read Ok]: secro.img

[Read Ok]: logo.bin

[Read Ok]: system.img

[Read Ok]: cache.img

[Read Ok]: userdata.img

[ScatCFG]: MT6572 / V1.1.1 / yuanda72_cwet_kk / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size: 655 MB

Scatter saved to : C:\Users\Asmit Shrestha\Desktop\New folder (7)\MT6572__VIPPO__MAX_P8__MAXP8__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!

Elapsed: 00:05:02

Reconnect Power/Cable!

VIPPO MAX P8 VIPPO Plus VIPPO+ MAX P8 cm2 Dongle Read Official Firmware Stock Rom Dead boot recover/boot logo fix/LCD Black White Fix 100% Tested Flashing File Download Free.


Note

Before downloading this file, check out of your mobile model, version, Processor/chipset properly and then file downloads and flashing. Otherwise, AG_Firmware File side will not be accountability.

 

Comment box

If you need another file, you can write the model number of this file in the comment box. I will try to provide you with the tested files related to the software problem through the AG_Firmware File website.

No comments:

Post a Comment

Please do not enter any link in the comment box.